I have struggled to print a bottle of my own design. When I got the bottom part settings working I never expected this kind of failure between std exposure layers. 
Print settings are: (1-95: 0,1/6s) (96-172: 0,1/4s) (173-605: 0,2/5s) (606- ,0,1/2,5s) 
After that I printed Uniz store file “Rock+Uniz Logo” and it had layer adhesion faults in two places. 
I printed file “Rock+Uniz Logo” earlier with previous FW and it printed perfectly!
What could be the problem? I used fresh bottle of resin well stirred.