Resin Leaked From Fill Bottle

Updated on November 11, 2019 in Support & Troubleshooting
2 on November 8, 2019

I’ve been printing with a Uniz Slash plus for a little over a month now with great results. Today, however, halfway through a print I noticed a large puddle of resin beneath the printer. After stopping the print and cleaning up the mess a little investigation revealed a leak from somewhere between the resin bottle and the pump. A closer inspection revealed that the piece of soft tubing between the needle for the fill bottle and the pump has multiple splits in the tubing. Does anyone know where a replacement can be sourced for this piece of tubing?

 
  • Liked by
Reply
0 on November 11, 2019

Hi, you can send your question to support@uniz.com. Someone will solve the problem for you.

  • Liked by
Reply
Cancel
0 on November 11, 2019

@Nathan – can you report back here on how well Uniz solved your problem?  I’m evaluating the purchase of a new printer and one criteria is how well the vendor works with owners to solve problems.

Thanks, Mike

  • Liked by
Reply
Cancel
Loading more replies